Seven Tips About J-Mount You Can t Afford To Miss
De CidesaWiki
You can have a portable recorder (with a USB port) and connect it to your Audio Interface, with a USB to RCA adaptor. This permits you to connect without the microphone, giving you access to this level and preamp levels in addition to if you will need to achieve a vintage sound, adding a tiny bit of distortion.
When using a Focusrite J-Mount, you get all the power of a microphone right into your DAW. This lets you mix but still get coming from your computer, your hardware and your headphones. The whole DAW interface can be designed to compliment the J-Mount, and provide a seamless interface between it and your studio. Though it's the way to send a signal you'll need to make sure you have the mic and gain chain choices to take advantage of your setup.
Ensure that you select a mono mic, to reduce switching between mics. This is especially important if you are recording instruments or voices. So that you have a zero dB signal from the DI back an option for recording is to link to the mic at the end of the DI cable.
Preamps are an important part of a signal chain. You might not know this, but a'standard' RCA cable isn't enough for preamps. A'Preamp out' cable is the first step, allowing you to connect your audio out (such as your notebook or desktop) to your preamp. You could run the audio out on your keyboard.
Be sure you pick a mic with a floating element. This enables you to set the level at as well as any' fading' effects' level. Be sure that the preamp has this For those who have interface or a DI. You can also consider making this a headphone out, instead of a computer line out. Another aspect to consider is if leave it high or you would like to cut the level where the signal enters the port.
If you're recording the input to your guitar amp (or home piano amp) and are using XLR cables, make certain that you have a stereo extension cable (not a microphone cable). This is essential if you are recording into an amplifier. For those of you who are recording to a card, be certain you have the stereo or'Analog Out' connector for recording.
